PRODUCTS & TECHNOLOGIES
Materials, Processes and Design — Engineered as One System
Quantified material data, a full semi-solid process chain and forward design for manufacturability.
INNOVATIVE MATERIALS
Defining Performance at the Source
Ultra-high-conductivity and ultra-high-strength aluminum-based and magnesium-based composites, developed for structural and thermal applications.
Aluminum-Based Alloys
High-strength and high-conductivity aluminum systems for structural and thermal components.
- Density 2.45 – 2.7 g/cm³
- Thermal conductivity up to 620 W/(m·K)
- Tensile strength up to 535 MPa
Magnesium-Based Alloys
Ultra-light magnesium systems, including Mg–Li grades, for weight-critical applications.
- Density 1.35 – 1.8 g/cm³
- Thermal conductivity up to 250 W/(m·K)
- Tensile strength up to 420 MPa
Composite Systems
Reinforced with lithium, graphene, carbon fiber and diamond phases for tailored performance.
- Strength–conductivity balance by design
- Reinforcement phases: Li / graphene / carbon fiber / diamond
- Custom grades for OEM targets
Thermal Conductivity Series
| System | Grade | Reinforcement | Density (g/cm³) | λ (W/(m·K)) |
|---|---|---|---|---|
| Al | 1GA-1 | Li+ | 2.45 | 159 |
| Al | 4GA-1 | Graphene+ | 2.7 | 450 |
| Al | 5GA-1 | Carbon fiber+ | 2.7 | 520 |
| Al | 6GA-1 | Diamond+ | 2.7 | 620 |
| Mg | 1GM-1 | Li+ | 1.35 | 80 |
| Mg | 2GM-1 | Carbon fiber+ | 1.8 | 180 |
| Mg | 3GM-1 | Graphene+ | 1.8 | 200 |
| Mg | 3GM-2 | Diamond+ | 1.8 | 250 |
Mechanical Strength Series
| System | Grade | Temper | Tensile (MPa) | Yield (MPa) | Elong. (%) |
|---|---|---|---|---|---|
| Al | 3GA-1 | F | 360 | 200 | 10 |
| Al | 3GA-2 | T5 | 330 | 280 | 3 |
| Al | 4GA-1 | T8 | 460 | 350 | 6 |
| Al | 5GA-1 | T8 | 510 | 450 | 10 |
| Al | 5GA-2 | T6 | 535 | 480 | 16 |
| Mg | 3GM-1 | T5 | 280 | 250 | 5 |
| Mg | 4GM-1 | T5 | 340 | 300 | 3 |
| Mg | 4GM-2 | T5 | 380 | 330 | 2.5 |
| Mg | 5GM-1 | T5 | 390 | 360 | 2 |
| Mg | 5GM-2 | T5 | 420 | 400 | 1.5 |
Typical values from company material datasheets. Batch-specific data available upon technical exchange.
INNOVATIVE PROCESSES
Semi-Solid Near-Net-Shape Forming
A full process chain from prototyping to volume delivery, focused on the semi-solid forming route.
Semi-Solid Die Casting
- Near-net-shape forming with reduced machining allowance
- Dense microstructure with low porosity
- Suitable for complex thin-walled structural parts
Semi-Solid Squeeze Casting
- High-pressure solidification for superior mechanical properties
- Excellent surface quality and dimensional accuracy
- Ideal for load-bearing and safety-relevant parts
Surface Treatment
- Corrosion and wear resistance engineering
- Functional and decorative finishes
- Process compatibility with Al/Mg substrates
Joining Technology
- Dissimilar-material joining solutions
- Joint strength and reliability validation
- Assembly-oriented design support
From a single prototype to volume delivery — the semi-solid process chain is completed in-house, including surface treatment and joining.
INNOVATIVE DESIGN
Design Is Manufacturing
Mass-production-oriented forward design: manufacturability and cost are balanced from the concept stage. Lightweight structural optimization and thermal management design are validated by simulation before any tooling is cut.
INNOVATIVE BUSINESS
Three Solution Tracks, One Accountable Partner
Customer pain points at the center — from selling products to delivering results.
Innovative Material Solutions
Alloy grade selection and custom performance targets — balancing strength, conductivity, density and cost for your product.
Innovative Design Solutions
Lightweight structural optimization and thermal management design, validated by simulation before tooling.
Innovative Process Solutions
Process route design, prototyping and mass-production support across the semi-solid forming chain.